Technical Specifications Lightboxes

Created by Chloe Wilkinson, Modified on Wed, 18 Mar at 2:18 PM by Chloe Wilkinson

Technical Specifications Lightboxes

Size Guide

Maximum: 2000 X 1000 X 320mm

2.2m

1.8m

1.6m

1.4m

1.2m

2000 X 1000

Assembly Instructions

Follow these straightforward steps to display your lightbox:

Remove the lightbox parts from its case and assemble the frame until it all parts are secure and check everything is stable.
Attach the graphic by pushing the silicone edge into the frame channel using the rubber seal. A credit card or similar flat edge can help guide it in. Pull the graphic taut, but don't overstretch it.
Plug the lightbox into the mains, switch it on.

Care Instructions

To maintain the quality and longevity of your lightbox:

Always store your lightbox in its carry case when not in use.
Avoid pulling the graphic fabric too tight and handle with care during fitting and removal.
Disconnect from the mains before cleaning, assembling, or storing the lightbox.
Use a soft, dry cloth to remove dust or light marks. For tougher stains, use a damp cloth, but avoid harsh chemicals that might damage the print or frame.
Avoid prolonged exposure to moisture or extreme temperatures, indoor use only.

Additional Information

Standard	Single-sided Lightbox 2000 X 850 X 320mm
Materials Information	190gsm UFabrik Soft Backlit Textile A woven soft backlit textile that is bruise and wrinkle-free with brilliant white point. Has a soft touch and feel and is PVC-free and REACH compliant. Substrate: 100% Polyester Weight: 190gsm / 5.6oz/yd Shrinkage: 190°C/45s <2% Fire retardancy: B1/NFPA 701 EN13501-1/DIN 4102-1 Recommend Fixation Temperature: 190-200°C,45-60s Yellowing Temperature: ≥ 210°C Application: Indoor
Frame Options	Standard Single-sided Lightbox The Standard Single-Sided Lightbox features a slim 60mm aluminium profile and long-lasting, low-energy LED lighting. Two twist-out feet provide stability, while a rollable blockout panel with pre-fixed LED strips ensures simple setup. Mains powered at 55w, it delivers consistent, reliable illumination. Premium Fast-Fold LED Lightbox The Premium Fast-Fold LED Lightbox is built with a sleek 85mm aluminium profile and inner support bar for strength. Integrated frame magnets allow multiple units to connect seamlessly, and twist-out feet add stability. Supplied with a wheeled, padded carry bag, it runs at 56w and houses the transformers internally for clean, mains-powered illumination without a bulky external pack.
Sizes	Standard Single-sided Lightbox H 2000 X W 850 X D 320mm Premium Fast-Fold LED Lightbox H 2000 X W 1000 X D 320mm
Printing Process	Dye-sublimation printing using heat to set vibrant inks into the fabric.
Environment	Suitable for indoor use only.
Sustainability	Fabric, LED components and aluminium frames may require specialist recycling facilities. Please check with your local authority for appropriate disposal or recycling options.