Technical Specifications Selfie Frames

Created by Chloe Wilkinson, Modified on Fri, 20 Jun at 10:19 AM by Chloe Wilkinson

Technical Specifications Selfie Frames

Size Guide

A1 - 594mm X 841mm

Care Instructions

To maintain the quality and longevity of your selfie frame:

Keep it Dry: Avoid exposure to rain or excessive moisture.
Store Flat: Prevent warping by storing your frame on a flat surface.
Handle with Care: Foam PVC is lightweight but can bend under pressure.
Wipe Gently: Use a soft, dry cloth to remove dust and fingerprints.
Avoid Direct Sunlight: Prolonged exposure may cause fading over time.

Additional Information

Materials Information	Surface hardness (Shore D): 35 Max. service temperature (°C): 55 Coefficient of linear expansion (mm/m.k): 0.07 Water absorption (23°C - 24h): <1% Behaviour in fire: C-s3, d0 (2-10mm). M1 (2-10mm) Apparent density (kg/m³): 400-550
Printing Process	Drop-on-demand digital inkjet printing for high-definition image quality with smooth shadows, gradients, and sharp text.
Finishing Method	Comes printed and pre-cut with rounded corners ready to use.
Sizes	A1 - 594mm X 841mm
Sustainability	Our foam can be recycled through specialist recyclers who can recycle PVC.
Environment	Our foam board is waterproof to an extent and can be used outdoors; however, we would recommend using it in the short term or indoors only to protect your artwork.
Material	Fogmalite Express: Crafted from durable 5mm co-extruded expanded rigid PVC sheet consisting of high-quality white cover layers and a black recycled core.