Technical Specifications Magnetic

Created by Chloe Wilkinson, Modified on Fri, 20 Jun at 10:18 AM by Chloe Wilkinson

Technical Specifications Magnetic

Size Guide

Minimum: 210mm X 297mm

Maximum: 594 X 841mm

Assembly Instructions

Follow these straightforward steps to display your magnetic sign:

Clean your surface where it will be applied using a mild detergent. Wipe dry with a soft cloth or allow it to air dry completely.
Ensure the area is flat, smooth, and free of ridges, indents, rust, or any uneven spots for optimal adhesion.
Starting at one corner, gently allow the magnetic pull to bring the sign and the surface together. Smooth it out as you go to avoid air pockets.
If you need to move the magnetic sign, lift it off completely from the sides rather than sliding it across the surface to prevent damage.
Make sure the magnetic sign is securely fixed before use, especially if it's on a moving object.

Care Instructions

To maintain the quality and longevity of your magnetic sign:

Wipe both the magnetic sign and the surface it's attached to with a soft, damp cloth and mild detergent. Avoid abrasive cleaners that can damage the magnet or surface.
Detach the magnetic to clean underneath and prevent dirt buildup or moisture from affecting adhesion.
When not in use, lay the magnetic signs flat in a cool, dry place. Avoid folding, rolling, or storing near heat sources to maintain their shape and magnetic strength.

Additional Information

Materials Information	Flexible Magnetic Sheeting with Outdoor Gloss / Matt White PVC Film. Standard Thickness: 0.85mm (Vehicle grade) (+0.03mm) Standard Width: 620mm, 1020mm, 1270mm (+3mm / -0) Standard Length: 30 / 10m (+0.5m / -0) Magnetic Properties: Maximum Energy Product: 0.65 - 0.57MGOe Remanence: 1600-1900g Coercivity: 1200 15000e Intrinsic Coercivity: 2200 - 25000e Magnetic Pole Width and Magnetic Pull: Magnetic Pole Width: 2.0mm Thickness of Magnetic Material - 0.75mm vehicle grade (0.85mm with coating) Magnetic Pull (g/cm2): 55 Physical Properties: Flexibility: Can be wrapped around a rod with a 12mm radius at 20°C without cracking. Specific Gravity: 3.5 - 3.7g/cm3 Cutting: Scissor cutting, knife-cutting, die-cutting, and slitting can be done with ease. Temperature Resistance End-use temperature range: -30°C / +55°C Short term resistance: 65°C Back coating: The magnetic sheeting has a UV hardening coating.
Printing Process	Drop-on-demand digital inkjet printing for high-definition image quality with smooth shadows, gradients, and sharp text.
Sizes	A1, A2, A3, A4 & custom.
Sustainability	Check with your local recycling facility to find out if they accept magnets and if there are any special handling requirements.
Environment	Suitable for outdoor use. 2-year durability under Middle European exposure conditions. Exposure to severe humidity, ultra-violet light or conditions found in tropical, subtropical or desert regions will cause a more rapid deterioration.