We have now launched Drilled Hole Calendars on the R1 site.
These are essentially stapled booklets with a drilled hole to make them into a calendar.
Due to the manual process of drilling the calendars (which are done by hand and take quite a lot of time), these are limited to the quantities available on the website. For any quotes above this quantity, please speak to Mark Wright beforehand to get approval.
Please note the maximum weight of the stock for the inners is 150gsm, due to the quality of the drill hole.
Template is attached
To manually book onto IPOP, see below:
The diameter of the drill hole is 6mm.
The distance from the outer edge of the circle to the safety is 1mm. The distance from the centre of the circle to the safety area is 5.5mm.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article